Microwave Oven Plastic Parts Molding

Door Handle A plastic handle used to open and close the door of a microwave oven. A heat-resistant and durable plastic material such as heat-resistant ABS (acrylonitrile-butadiene-styrene co-polymer) is usually used. Plastic panel on the microwave door for protection and insulation. Generally made of heat-resistant PC (polycarbonate) or other thermoplastics. Microwave oven control panels and buttons usually contain plastic parts that control the operating functions of the microwave oven. Control panels are usually made of PC, ABS, or other heat- and wear-resistant plastic materials. The rotating platform inside the microwave oven, usually made of plastic, is used to rotate the food for even heating. Turntables are usually made of heat-resistant PP (polypropylene) or other heat-resistant plastics. Turntable Ring (Turntable Base) A plastic ring placed at the bottom of the microwave oven interior that supports the turntable. Turntable rings are often made of heat-resistant PP or other heat-resistant plastic materials. Food Warmer A plastic heater component used to heat food to the proper temperature. Food heaters are usually made of heat-resistant plastic materials such as PPS (polyphenylene sulfide). Lamp shade A plastic cover used to protect the light inside the microwave oven. Lampshades are usually made of high temperature resistant PC or other transparent plastic materials.

One of the common production methods used in the manufacture of plastic parts for microwave ovens is injection moulding. Injection moulding is a widely used process for producing plastic products, including microwave oven plastic parts.

Injection moulding process:

Mould design: Firstly, according to the design requirements of the microwave oven plastic parts, the mould required for injection moulding is made. The mould usually consists of a fixed mould and a moving mould, which together form the shape of the plastic part. Pre-treatment of plastic pellets: Plastic pellets usually need to be preheated and melted for further processing in the injection moulding machine.

Injection moulding process:

Injection: Heated and melted plastic pellets are injected into the injection cylinder of the injection moulding machine.

Injection: The shot is injected through the screw into the mould, filling the mould cavity and forming the plastic part of the desired shape.

Pressure Retention: Before the plastic cools, a certain amount of pressure is applied to ensure that the plastic part fully fills the mould and retains its shape.

Cooling and Curing: The plastic is cooled in the mould and cured into a plastic part.

Open and Discharge: Once the plastic is fully cured, the mould is opened and the moulded plastic part is discharged.

Post-processing: The moulded microwave oven plastic part may need to be deburred, trimmed, assembled or other post-processing steps to meet the quality requirements of the final product.

For custom injection molds, we can provide professional microwave oven plastic parts Molding services. Usually microwave oven plastic parts Molding are manufactured using injection molding technology. The mold materials for injection molds can be chosen from P20, 718, S136, H13 and so on. The mold material reflects the mold life and product material requirements.

When it comes to customizing blow molding molds, we can provide professional blow molding customization services.

Microwave oven plastic parts making

1.We communicate product design according to samples/drawings and your requirements.

2.After the product design is confirmed, we carry out the mold design, we provide all kinds of injection molds, blow molds, silicone molds, die-casting molds services.

3.Material procurement, steel cutting and mold basic tools.

4.Mold assembly

5.Mold inspection, tracking and controlling mold processing.

6. We will inform you the date of mold trial and send you the sample inspection report and injection parameters together with the sample.

7.Your instruction and confirmation of shipment.

8.Prepare the mold before packing.

Microwave oven plastic parts Molding Specification

1. Professional manufacturer,design,production injection mould and stamping mould quality control

2. rich export experience plastic injection mould and stamping mould

3. Reasonable price of design mould

4. Cavities: single or as per your requirements cavity

5. Treatment: S45C Pretreat>25Hrc,And Nitriding

6. Mould Steel: Cavity ,Core and slide: P20 ,2738,2136 available Mold base :LKM available

7. Standard:DEM ,HUSKY,available

8. Hot runner: according to your demand

9. Life time: >300 Thousand Times

10. Package: Plywood case, anti-rust paint

Mold design:

Information you need to provide us

1. If you have drawings, 2D drawings, 3D drawings (preferably in STEP format).

2. If there are no drawings, you need to provide specific length, width, height and weight information. (It’s best to send us samples)

3. Should the mold be sent to your country, or leave the mold in our factory and we will help you produce the product.

4. Mold material requirements, cavity number requirements (you can tell us about the size of your injection molding machine)

5. Product material requirements and product quantity. (You can tell us about the use of the product and we can give you suggestions)

Transaction process:

Mold testing:

Once the mold is complete, I do a mold test. It usually takes about 3-5 days to complete. We need to assemble the mold, adjust the pressure data of the machine, and try production. We need to check whether there are problems during the normal production of the mold and make modifications.

Product packaging

Packaging according to your needs

1.By air ,it takes 3-7 days for delivery .The goods can be shipped by DHL ,Fedex ,UPS .

2.By sea ,the delivery time is based on your port .

To South East Asian Countries takes about 5-12 days

To Middle east countries takes about 18-25 days

To European countries takes about 20-28 days

To American countries takes about 28-35 days

To Australia takes about 10-15 days

To African countries takes about 30-35 days.

Factory

Video-1: (Factory Video)

Video-2: (Injection Molding)

Video-3: (Blow molding)

Video-4: (Blow molding)

Video-5: (Roll molding)

Customer satisfaction is our most important goal. We focus on communication and cooperation with our customers, always pay attention to their needs and provide quick response and quality customer service. Our injection production mold factory is committed to establishing long-term relationships and ensuring that our customers receive the best after-sales service during the purchase and use of our products, and we will definitely do our best to solve any problems for our customers.

FAQ

1. Who are we?

We are based in Zhejiang, China, start from 2014,sell to North America(30.00%),Southern Europe(10.00%),Northern.

Europe(10.00%),Central America(10.00%),Western Europe(10.00%),Mid East(10.00%),Eastern Europe(10.00%),South America(10.00%). There are total about 51-100 people in our office.

2. How can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.

3. What can you buy from us?

Mould,Plastic Product, Metal Product,Dental Product,CNC machining.

4. Why should you buy from us not from other suppliers?

Ningbo P&M Plastic Metal Product Co., Ltd. We main do all kinds of 3d design, 3d printing and plastic metal molds tooling and products. We have our own engineer and factory. One-stop supply:3d design - 3d printing - mold making - plastic injection.

5. What services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU;

Accepted Payment Currency:USD,EUR;

Accepted Payment Type: T/T,L/C,PayPal,Western Union,Escrow;

Language Spoken:English,Chinese,Spanish,French,Russian.

6. What are the characteristics of your service?

1. Your inquiry related to our products or prices will be replied within 24hours.

2. Welltrained and experienced staffs to answer all your enquiries in fluent English.

3. Offering the support to solve the problem in the application or selling period.

4. Competitive prices based on same quality.

5. Guarantee samples quality same as mass production quality.